女被啪到深处出白浆GIF动态图

    <p id="ele4j"><strong id="ele4j"><small id="ele4j"></small></strong></p>
        1. <acronym id="ele4j"><strong id="ele4j"></strong></acronym>

          News Release

          2021-11-05
          Epson release New product : S2D13V70 Automotive Grade Bridge IC

          S2D13V70 (eDP⇒OpenLDI Bridge IC)

          S2D13V70S2D13V70 is an eDP(rev.1.4a) to Open LDI bridge device which can realize the connectivity between the eDP source to the display panel with the Open LDI interface. It can receive the data rate of 1.62Gbps/2.7Gbps with 1 lane/2lane eDP and convert it to transport with 2ch Open LDI signaling with the pixel clock frequency up to 148.5MHz (per 1ch). The specification is simple enough so that it can be easily inserted into existing system display architectures with minimal modifications required, making it an ideal solution for both existing and future designs.S2D13V70 is also qualified for automotive design including AEC-Q100 certification and several functional safety features.

          S2D13V70's eDP Rx IP (rev1.4a) can also connect to DP (rev1.3 and 1.4) signals. Please contact us for details.
           
           

          Features

          Simple Bridge S2D13V70

          Power Supply

          3.3V / 1.8V dual supply

          Input

          eDP rev.1.4a x 2Lane, Max 2.7Gbps/lane

          Output

          OpenLDI-Tx x 2Ch, Max120MHz/ch

          Display resolution

          up to 1920 x 1200@60fps

          Host IF

          SPI

          Image Correction

          8-bit Digital Gamma LUT + 2-bit Dithering

          Safety Feature

          SPI connection (checksum function by 16byte cache)
          Input pixel clock/sync. signal monitoring
          CRC (Full screen / Register setting / Frame comparison)
          Output watermark function
          Blank screen
          Error / Interrupt pins

          Automotive QA

          AEC-Q100 qualifications
          Ta : -40 ~ 105

          Others

          System Clock : 48MHz for always running clock
          SPI Bridge (SPI Slave to Master bridge)
          Splitter function (Line split / LR split)

          Package PFBGA8-81 (8mm x 8mm x 1.2mm, 0.8mm pitch)
          Briefsheet https://global.epson.com/products_and_drivers/semicon/pdf/id003037.pdf
          Status Under Development

          Splitter Function


          Splitter Function(Line or LR split)
          Resolution size : Possible to sprit dual display within 1920×1080 resolution.
           

          News from: https://global.epson.com/products_and_drivers/semicon/products/interface_auto/#ac02
          Epson website: https://global.epson.com/

          More information, please contact Mr. Alex Cheng at Seraphim, Taiwan distributor of Epson, Tel:6615-8281 ext.212 or email to alexcheng@seraphim.com.tw


          Previous Page   |   Back   |   Next Page

          女被啪到深处出白浆GIF动态图